Radio Frequency Identification (RFID) Card Readers provide a low-cost solution to read passive RFID transponder tags up to 2 inches away. The RFID Card Readers can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, robotics navigation, inventory tracking, payment systems, and car immobilization. The RFID card reader read the RFID tag in range and outputs unique identification code of the tag at baud rate of 9600. The data from RFID reader can be interfaced to be read by microcontroller or PC. The project is designed in such a way that an RFID reader has to be fixed in each and every bus an RFID tag should be fixed in each and every bus station at the entrance. In the bus, the RFID reader is to be interfaced to the controller along with an LCD and APR9600 voice module. So whenever the bus reaches the bus stop the RFID reader present in the bus reads the RFID tag, and the read value will be compared to the predefined RFID codes in the controller, if it is matched then it displays the corresponding station name on the LCD and the voice message will also be announced through the APR9600 module. So that the passengers can easily understand the bus location. In this project 7805 is a regulator and it avoids noise spikes in power supply. RFID modem is connected microcontroller through serial port. These RFID modem works under 9600 or 4800 baud rates. 16X2 LCD connected to microcontroller through digital I/O lines.